Advanced Modeling using Creo Parametric 3.0

Loading Map....

Date(s) - 02/05/2017 - 04/05/2017
9:30 am - 5:30 pm

PD Solutions Penang, Malaysia


Advanced Modeling using Creo Parametric 3.0


Course Code: TRN-4502
Course Length: 3 Days

The Advanced Modeling using Creo Parametric 3.0 training course teaches you how to use advanced part modeling techniques to improve your product designs. In this course, you will learn how to create and modify design models using advanced sketching techniques and feature creation tools. You will also learn how to reuse existing design geometry when creating new design models. After completing this course, you will be well prepared to work efficiently with complex product designs using Creo Parametric 3.0.

At the end of each module, you will complete a set of review questions to reinforce critical topics from that module. At the end of the course, you will complete a course assessment in Pro/FICIENCY intended to evaluate your understanding of the course as a whole

Course Objectives

  • Learn advanced selection techniques
  • Create advanced datum features
  • Use advanced sketching techniques
  • Create advanced holes
  • Create advanced drafts and ribs
  • Create advanced shells
  • Create advanced rounds and chamfers
  • Use relations and parameters
  • Create advanced blends
  • Create sweeps with variable sections
  • Create helical sweeps
  • Create swept blends
  • Learn advanced layer techniques
  • Learn advanced reference management techniques
  • Create family tables
  • Reuse features
  • Learn advanced copy techniques
  • Create advanced patterns


  • Introduction to Creo Parametric 3.0


This course is intended for mechanical designers, design engineers. People in related roles will also benefit from taking this course.


Day 1
Module 1 Advanced Selection
Module 2 Advanced Datum Features
Module 3 Advanced Sketching
Module 4 Advanced Hole Creation
Module 5 Advanced Drafts and Ribs
Module 6 Advanced Shells
Module 7 Advanced Rounds and Chamfers

Day 2
Module 8 Relations and Parameters
Module 9 Advanced Blends
Module 10 Sweeps with Variable Sections
Module 11 Helical Sweeps
Module 12 Swept Blends

Day 3
Module 13 Advanced Layers
Module 14 Advanced Reference Management
Module 15 Family Tables
Module 16 Reusing Features
Module 17 Advanced Copy
Module 18 Advanced Patterns

Course Content

Module 1. Advanced Selection
i. Advanced Chain Selection
ii. Advanced Surface Selection
iii. Using the Search Tool
Knowledge Check Questions

Module 2. Advanced Datum Features
i. Creating Datum Graphs
ii. Creating Datum Coordinate Systems
iii. Creating Points On or Offset from Entities
iv. Creating Points at Intersections
v. Creating Points using an Offset Coordinate System
vi. Sketching Geometry Datums
vii. Creating Curves Through a Point or Vertex
viii. Creating a Curve Through a Point Array
ix. Creating a Curve from a Cross-Section
x. Creating a Curve From Equation
xi. Creating Composite Curves
xii. Creating a Curve from Curve Intersections
xiii. Creating a Curve at Surface Intersection
xiv. Projecting and Wrapping Curves
xv. Trimming Curves
xvi. Creating Offset Curves
xvii. Creating Cosmetic Sketches
Knowledge Check Questions

Module 3. Advanced Sketching
i. Using Sketched Curves
ii. Sketching Ellipses
iii. Sketching Elliptical Fillets
iv. Sketching Splines
v. Modifying Splines — Basic Operations
vi. Modifying Splines — Advanced Operations
vii. Importing and Exporting Spline Points
viii. Sketching Conics
ix. Sketching Text
x. Analyzing Sketcher Convert Options
xi. Locking Sketcher Entities
xii. Analyzing Sketcher Dimension Options
xiii. Sketcher Diagnostic Tools
Knowledge Check Questions

Module 4. Advanced Hole Creation
i. Creating Standard Holes
ii. Lightweight Hole Display
iii. Creating Sketched Holes
iv. Creating On Point Holes
v. Creating Cosmetic Threads
Knowledge Check Questions

Module 5. Advanced Drafts and Ribs
i. Drafting Intent Surfaces
ii. Creating Drafts with Multiple Angles
iii. Using the Extend Intersect Surfaces Draft Option
iv. Creating Drafts Split at Sketch
v. Creating Drafts Split at Curve
vi. Creating Drafts Split at Surface
vii. Creating Drafts with Variable Pull Direction
viii. Creating Trajectory Ribs
Knowledge Check Questions

Module 6. Advanced Shells
i. Analyzing Shell References and Thickness Options
ii. Excluding Surfaces from Shells
iii. Extending Shell Surfaces
iv. Analyzing Shell Corner Options
Knowledge Check Questions

Module 7. Advanced Rounds and Chamfers
i. Analyzing Round Profile
ii. Analyzing Round Creation Methods
iii. Creating Rounds Through Curve
iv. Creating Variable Radius Rounds
v. Auto Round
vi. Creating Rounds by Reference
vii. Analyzing Round References and Pieces
viii. Using Intent Edges for Rounds
ix. Using Round Transitions
x. Analyzing Additional Chamfer Types
xi. Analyzing Advanced Chamfer Dimensioning Schemes
xii. Analyzing Chamfer Creation Methods
xiii. Creating Corner Chamfers
xiv. Creating Chamfers by Reference
xv. Analyzing Chamfer References and Pieces
xvi. Using Intent Edges for Chamfers
xvii. Using Chamfer Transitions
Knowledge Check Questions

Module 8. Relations and Parameters
i. Understanding Relation Theory
ii. Understanding Relation Types
iii. Understanding Basic Relation Operators and Functions
iv. Understanding Advanced Relation Operators and Functions
v. Exact Relation
vi. Creating Parameters
vii. Understanding Advanced Parameter Options
viii. Creating Relations
ix. Creating Relations for Patterns
x. Creating Section Relations
xi. Using the Evalgraph Function
xii. Using Simultaneous Equations
Knowledge Check Questions

Module 9. Advanced Blends
i. Creating Blends by Selecting Non-Parallel Sections
ii. Analyzing Blend Section Tools
iii. Analyzing Blend Tangency
iv. Creating Rotational Blends by Selecting Sections
v. Creating Rotational Blends by Sketching Sections
vi. Analyzing Rotational Blend Options
vii. Analyzing Rotational Blend Tangency
Knowledge Check Questions

Module 10. Sweeps with Variable Sections
i. Understanding Sweeps with Variable Sections Theory
ii. Creating Sweeps using a Constant Section
iii. Creating Sweeps Normal to Trajectory
iv. Creating Sweeps Using Constant Normal Direction
v. Creating Sweeps with Variable Sections Normal to Projection
vi. Analyzing Horizontal and Vertical Control in Sweeps
vii. Creating Sweeps with Variable Sections Utilizing Multiple Trajectories
viii. Creating Sweeps with Variable Sections using Tangent Trajectories
ix. Analyzing Sweeps with Variable Sections Trajectory Options and Rules
x. Using Trajpar with Solid Features
xi. Using Trajpar and Datum Graphs with Solid Features
Knowledge Check Questions

Module 11. Helical Sweeps
i. Understanding Helical Sweeps Theory
ii. Creating Helical Sweeps for Springs
iii. Creating Helical Sweeps for Threads
iv. Analyzing Helical Sweep Profile and Pitch Variations
v. Utilizing Variable Sections in Helical Sweeps
Knowledge Check Questions

Module 12. Swept Blends
i. Understanding Swept Blend Theory
ii. Creating Swept Blends by Selecting Sections
iii. Creating Swept Blends by Sketching Sections
iv. Analyzing Swept Blend Section Options
v. Analyzing Swept Blend Section Plane Control
vi. Analyzing Horizontal and Vertical Control in a Swept Blend
vii. Analyzing Swept Blend Tangency
viii. Analyzing Swept Blend Options
ix. Analyzing Swept Blend Rules
Knowledge Check Questions

Module 13. Advanced Layers
i. Understanding Layers
ii. Creating and Managing Layers
iii. Creating Layer Rules
iv. Creating Layers in Assemblies
Knowledge Check Questions

Module 14. Advanced Reference Management
i. Editing Feature References
ii. Replacing Feature References
iii. Replacing Sketcher References
iv. Replacing Sketcher Geometry
Knowledge Check Questions

Module 15. Family Tables
i. Understanding Family Table Theory
ii. Creating a Family Table
iii. Patternizing Family Table Instances
iv. Creating a Multi-Level Family Table
v. Editing Family Table Members
Knowledge Check Questions

Module 16. Reusing Features
i. Creating UDFs
ii. Placing UDFs
iii. Creating UDFs Using On-Surface Coordinate Systems
iv. Creating Inheritance Features
v. Using External Merge to Add Material
vi. Using External Merge to Remove Material
Knowledge Check Questions

Module 17. Advanced Copy
i. Configuring Independency
ii. Analyzing Advanced Reference Configuration
iii. Copying Features Fully Dependent with Options to Vary
Knowledge Check Questions

Module 18. Advanced Patterns
i. Understanding Pattern Regeneration Options
ii. Creating Dimension Patterns in One Direction
iii. Creating Dimension Patterns in Two Directions
iv. Creating Rotational Dimension Patterns
v. Creating Geometry Patterns
vi. Creating Fill Patterns
vii. Specifying Fill Pattern Settings
viii. Creating Pattern Tables
ix. Applying Pattern Tables
x. Creating Curve Patterns
xi. Creating Point Patterns
xii. Unpatterning Group Patterns
xiii. Creating Patterns of Patterns
xiv. Moving/Mirroring Patterns
Knowledge Check Questions

No comments yet.

Leave a Reply