Milling using Creo Parametric 2.0

Loading Map....

Date/Time
Date(s) - 10/04/2017 - 14/04/2017
9:30 am - 5:30 pm

Location
PD Solutions Kuala Lumpur, Malaysia

Category(ies)



Milling using Creo Parametric 2.0


Overview

Course Code: TRN-3908
Course Length: 5 Days

In this course, you will learn how to machine products using Creo Parametric manufacturing tools.

This course covers creating tool paths for three axis milling machines. During the course, you will learn how to complete each phase of the manufacturing process. You will start by creating manufacturing models and configuring the manufacturing environment. This will include configuring tools, fixtures, and machining operations. You will then learn how to create milling sequences, holemaking sequences, and post-process cutter location (CL) data to create machine code. After completing the course, you will be able to create numerical control (NC) programs for milling machines and post-process cutter location (CL) data to create machine specific code.

At the end of each module, you will complete a set of review questions to reinforce critical topics from that module. At the end of the course, you will complete a course assessment in Pro/FICIENCY intended to evaluate your understanding of the course as a whole.


Course Objectives

  • Understand the manufacturing process
  • Create and configure manufacturing models
  • Configure the manufacturing environment
  • Create and modify milling sequences
  • Create and modify holemaking sequences
  • Use the process manager to create NC sequences
  • Post-process cutter location (CL) data

Prerequisites

  • Introduction to Creo Parametric – Fundamentals (Web Based Training) or equivalent experience

Audience

  • This course is intended for manufacturing engineers and NC machinists

Agenda

Day 1 
Module 1 Introduction to Manufacturing
Module 2 Creating Manufacturing Models
Module 3 Configuring Operations
Module 4 Using Reference Models
Module 5 Using Workpiece Models
Module 6 Creating and Using NC Model Assemblies
Module 7 Creating and Configuring Workcells

Day 2 
Module 8 Creating and Configuring Tools
Module 9 Using Template Manufacturing Models
Module 10 Using Manufacturing Parameters
Module 11 Creating Face Milling Sequences

Day 3
Module 12 Creating Volume Milling Sequences
Module 13 Creating Profile Milling Sequences
Module 14 Creating Straight Cut Surface Milling Sequences
Module 15 Creating From Surface Isolines Surface Milling Sequences

Day 4
Module 16 Creating Cut Line Surface Milling Sequences
Module 17 Advanced Surface Milling Options
Module 18 Creating Roughing and Re-roughing Sequences
Module 19 Creating Finishing Sequences

Day 5
Module 20 Creating Trajectory Milling Sequences
Module 21 Creating Holemaking Sequences
Module 22 Creating Engraving Sequences
Module 23 Using the Process Manager
Module 24 Creating and Post-Processing CL Data Files


Course Content

Module 1. Introduction to Manufacturing
i. Manufacturing Process Overview
Knowledge Check Questions

Module 2. Creating Manufacturing Models
i. Creating Manufacturing Models
Knowledge Check Questions

Module 3. Configuring Operations
i. Configuring Operations
Knowledge Check Questions
Module 4. Using Reference Models
i. Using Reference Models
Knowledge Check Questions
Module 5. Using Workpiece Models
i. Using Workpiece Models
Knowledge Check Questions
Module 6. Creating and Using NC Model Assemblies
i. Creating and Using NC Model Assemblies
Knowledge Check Questions
Module 7. Creating and Configuring Workcells
i. Creating and Configuring Workcells
Knowledge Check Questions
Module 8. Creating and Configuring Tools
i. Understanding Milling Tools
ii. Creating Standard Milling Tools
iii. Creating Solid Model Milling Tools
iv. Creating and Using Tool Cutting Data
v. Retrieving Tool Data
Knowledge Check Questions
Module 9. Using Template Manufacturing Models
i. Using Template Manufacturing Models
Knowledge Check Questions
Module 10. Using Manufacturing Parameters
i. Understanding Manufacturing Parameter Concepts
ii. Configuring Parameter Values
iii. Using Site Parameter Files
Knowledge Check Questions
Module 11. Creating Face Milling Sequences
i. Basic Face Milling
ii. Lateral Control Face Milling Parameters
iii. Depth Control Face Milling Parameters
iv. Entry and Exit Face Milling Parameters
Knowledge Check Questions
Module 12. Creating Volume Milling Sequences
i. Basic Volume Milling
ii. Volume Milling with Mill Windows
iii. Scanning Volume Milling Parameters
iv. Depth and Lateral Control Volume Milling Parameters
v. Stock Allowance Volume Milling Parameters
vi. Gathering Mill Volumes
vii. Modifying Volume Milling Toolpaths
Knowledge Check Questions
Module 13. Creating Profile Milling Sequences
i. Basic Profile Milling
ii. Depth and Lateral Control Profile Milling Parameters
iii. Lead In and Lead Out Motions
Knowledge Check Questions
Module 14. Creating Straight Cut Surface Milling Sequences
i. Understanding Surface Milling
ii. Straight Cut Surface Milling
iii. Straight Cut Surface Milling Parameters
iv. Creating Surface Milling Reference Geometry
Knowledge Check Questions
Module 15. Creating From Surface Isolines Surface Milling Sequences
i. From Surface Isolines Surface Milling
Knowledge Check Questions
Module 16. Creating Cut Line Surface Milling Sequences
i. Cut Line Surface Milling
Knowledge Check Questions
Module 17. Advanced Surface Milling Options
i. Advanced Surface Milling Options
Knowledge Check Questions
Module 18. Creating Roughing and Re-roughing Sequences
i. Basic Roughing and Re-roughing
ii. Roughing Scans and Entry and Exit Parameters
iii. Step Depth and Tolerance Control Roughing Parameters
iv. Additional Scallop Height Control Roughing Parameters
v. Roughing Corner Options
Knowledge Check Questions
Module 19. Creating Finishing Sequences
i. Basic Finishing
ii. Editing Finishing Parameters
Knowledge Check Questions
Module 20. Creating Trajectory Milling Sequences
i. Understanding Trajectory Milling
ii. Creating Sketched Milling Tools
iii. Basic 2-Axis Trajectory Milling
iv. 2-Axis Trajectory Milling Depth Control Parameters
v. 2-Axis Trajectory Milling Cutting Slices Parameters
vi. Basic 3-Axis Trajectory Milling
vii. 3-Axis Trajectory Milling Multi-Step and Multi-Pass Parameters
Knowledge Check Questions
Module 21. Creating Holemaking Sequences
i. Understanding Holemaking
ii. Basic Drilling
iii. Editing Drilling Toolpaths
iv. Creating and Using Drill Groups
Knowledge Check Questions

Module 22. Creating Engraving Sequences
i. Engraving on Flat and Complex Surfaces
Knowledge Check Questions

Module 23. Using the Process Manager
i. Using Process Manager Tools
ii. Editing Process Items
iii. Creating New Items in the Process Manager
iv. Creating and Using Manufacturing Templates
Knowledge Check Questions

Module 24. Creating and Post-Processing CL Data Files
i. Creating and Post-Processing CL Data Files
Knowledge Check Questions

No comments yet.

Leave a Reply