Mold Design using Creo Parametric 2.0

Loading Map....

Date/Time
Date(s) - 06/04/2015 - 07/04/2015
9:00 am - 5:00 pm

Location
PD Solutions Singapore Office

Category(ies)



Mold Design using Creo Parametric 2.0


Overview

Course Code: TRN-3920
Course Length: 2 Days

The Mold application provides the tools to create a mold model from start to finish using the mold design process within Creo Parametric 2.0. In this course, you will learn how to create, modify, and analyze mold components and assemblies. Any changes made to the design model automatically propagate to the mold components and assemblies. You will also how to create final extract components that reflect the geometry of the design model, along with shrinkage considerations, adequate drafting, mold features, and cooling systems. After completing this course, you will have a better
understanding of the mold design process and how to create molded products using the mold design process.

At the end of each module, you will complete a set of review questions to reinforce critical topics from that module. At the end of the course, you will complete a course assessment in Pro/FICIENCY intended to evaluate your understanding of the course as a whole.


Course Objectives

  • Learn the basic mold process
  • Prepare design models for the mold process
  • Analyze design models to ensure their readiness for molding
  • Create mold models
  • Apply shrinkage to the reference model
  • Create and assemble workpieces into the mold model
  • Create mold volumes
  • Create parting lines and parting surfaces
  • Split mold volumes
  • Extract mold components
  • Create mold features
  • Learn how to fill and open the mold

Prerequisites

  • Introduction to Creo Parametric 2.0
  • Basic understanding of industry standard Mold design terminology and processes
  • Knowledge of Creo Parametric surfacing techniques a plus

Audience

  • This course is intended for designers, machinists, and manufacturing engineers. People in related roles will also benefit from taking this course.

Agenda

Day 1
Module 1 Introduction to the Creo Parametric Basic Mold Process
Module 2 Design Model Preparation
Module 3 Design Model Analysis
Module 4 Mold Models
Module 5 Shrinkage
Module 6 Workpieces
Module 7 Mold Volume Creation

Day 2
Module 8 Parting Line and Parting Surface Creation
Module 9 Splitting Mold Volumes
Module 10 Mold Component Extraction
Module 11 Mold Features Creation
Module 12 Filling and Opening the Mold


Course Content

Module 1. Introduction to the Creo Parametric Basic Mold Process
i. Creo Parametric Basic Mold Process
Knowledge Check Questions

Module 2. Design Model Preparation
i. Understanding Mold Theory
ii. Preparing Design Models for the Mold Process
iii. Creating Profile Rib Features
iv. Creating Drafts Split at Sketch
v. Creating Drafts Split at Curve
vi. Creating Drafts Split at Surface
Knowledge Check Questions

Module 3. Design Model Analysis
i. Analyzing Design Models Theory
ii. Performing a Draft Check
iii. Understanding Mold Analysis Settings
iv. Performing a Thickness Check
Knowledge Check Questions

Module 4. Mold Models
i. Creating New Mold Models
ii. Analyzing Model Accuracy
iii. Locating the Reference Model
iv. Assembling the Reference Model
v. Creating the Reference Model
vi. Redefining the Reference Model
vii. Analyzing Reference Model Orientation
viii. Analyzing Mold Cavity Layout
ix. Analyzing Variable Mold Cavity Layout
x. Analyzing Mold Cavity Layout Orientation
xi. Calculating Projected Area
Knowledge Check Questions

Module 5. Shrinkage
i. Understanding Shrinkage
ii. Applying Shrinkage by Scale
iii. Applying Shrinkage by Dimension
Knowledge Check Questions

Module 6. Workpieces
i. Creating Style States Using the View Manager
ii. Creating a Workpiece Automatically
iii. Creating a Custom Automatic Workpiece
iv. Creating and Assembling a Workpiece Manually
v. Reclassifying and Removing Mold Model Components
Knowledge Check Questions

Module 7. Mold Volume Creation
i. Surfacing Terms
ii. Understanding Mold Volumes
iii. Sketching Mold Volumes
iv. Creating Sliders using Boundary Quilts
v. Sketching Slider Mold Volumes
vi. Creating a Reference Part Cutout
vii. Sketching Lifter Mold Volumes
viii. Replacing Surfaces and Trimming to Geometry
ix. Sketching Insert Mold Volumes
Knowledge Check Questions

Module 8. Parting Line and Parting Surface Creation
i. Understanding Parting Lines and Parting Surfaces
ii. Creating an Automatic Parting Line Using Silhouette Curves
iii. Analyzing Silhouette Curve Options: Slides
iv. Analyzing Silhouette Curve Options: Loop Selection
v. Creating a Skirt Surface
vi. Analyzing Skirt Surface Options: Extend Curves
vii. Analyzing Skirt Surface Options: Tangent Conditions
viii. Analyzing Skirt Surface Options: Extension Directions
ix. Analyzing Skirt Surface Options: ShutOff Extension
x. Analyzing Surface Editing and Manipulation Tools
xi. Merging Surfaces
xii. Creating Saddle Shutoff Surfaces
xiii. Creating a Parting Surface Manually
Knowledge Check Questions

Module 9. Splitting Mold Volumes
i. Splitting the Workpiece
ii. Splitting Mold Volumes
iii. Splitting Volumes using Multiple Parting Surfaces
iv. Blanking and Unblanking Mold Items
v. Analyzing Split Classification
Knowledge Check Questions

Module 10. Mold Component Extraction
i. Extracting Mold Components from Volumes
ii. Applying Start Models to Mold Components
Knowledge Check Questions

Module 11. Mold Features Creation
i. Creating Waterline Circuits
ii. Analyzing Waterline End Conditions
iii. Performing a Waterlines Check
iv. Creating Sprues and Runners
v. Creating Ejector Pin Clearance Holes
vi. Creating UDFs
vii. Placing UDFs
Knowledge Check Questions

Module 12. Filling and Opening the Mold
i. Creating a Molding
ii. Opening the Mold
iii. Draft Checking a Mold Opening Step
iv. Interference Checking a Mold Opening Step
v. Viewing Mold Information
Knowledge Check Questions

Discuss: “Mold Design using Creo Parametric 2.0”

  1. 9 October 2014 at 11:16 pm #

    Please provide price to attend class in Mold Design using Creo.
    Regards,
    John

    Posted by John
    • 11 October 2014 at 5:38 am #

      Hi John,

      This course is conducted only in Singapore. Where are you located right now?

      Posted by admin
      • 20 October 2014 at 11:55 pm #

        I am in Australia, considering visiting Singapore.

        Posted by John

Leave a Reply