Sheetmetal Design using Creo Parametric 3.0

Loading Map....

Date/Time
Date(s) - 11/08/2016 - 12/08/2016
9:00 am - 5:00 pm

Location
PD Solutions Kuala Lumpur, Malaysia

Category(ies)



Sheetmetal Design using Creo Parametric 3.0


Overview

Course Code: TRN-4507
Course Length: 2 Days

Screen Shot 2012-09-18 at 2.30.49 PMSheetmetal Design using Creo Parametric 2.0 is a comprehensive training course that teaches you how to create sheetmetal parts in Creo Parametric. The course builds upon the basic lessons you learned in Introduction to Creo Parametric 2.0 and serves as the second stage of learning. In this course, you will learn how to design sheetmetal parts and assemblies, including sheetmetal production drawings. All the functions needed to create sheetmetal parts, drawings, and assemblies are covered.

Upon completion of this course, you will be able to create sheetmetal design models, create the flat state of the model, and document both in production drawings.

At the end of each module, you will complete a set of review questions to reinforce critical topics from that module. At the end of the course, you will complete a course assessment in Pro/FICIENCY intended to evaluate your understanding of the course as a whole.


Course Objectives

  • The sheetmetal design process
  • Sheetmetal model creation, conversion, and display
  • Methods of developed length calculation
  • Primary wall features
  • Secondary wall features
  • Partial walls
  • Bend relief
  • Unbend and bend back features
  • Sheetmetal bend features
  • Flat patterns
  • Sheetmetal cuts
  • Forms
  • Notch and punch features
  • Sheetmetal environment setup
  • Sheetmetal design Information tools
  • Sheetmetal design rules
  • Detailing sheetmetal designs
  • Sheetmetal design project

Prerequisites

Introduction to Creo Parametric 3.0


Audience

  • This course is intended for design engineers, mechanical designers, and industrial designers. People in related roles can also benefit from taking this course.

Agenda

Day 1
Module 1 Introduction to the Creo Parametric Sheetmetal Design Process
Module 2 Sheetmetal Model Fundamentals
Module 3 Creating Primary Sheetmetal Wall Features
Module 4 Creating Secondary Sheetmetal Wall Features

Day 2
Module 5 Bending and Unbending Sheetmetal Models
Module 6 Modifying Sheetmetal Models
Module 7 Sheetmetal Setup and Tools
Module 8 Detailing Sheetmetal Designs
Module 9 Design Project


Course Content

Module 1. Introduction to the Creo Parametric Sheetmetal Design Process
i. Creo Parametric Sheetmetal Design Process
Knowledge Check Questions

Module 2. Sheetmetal Model Fundamentals
i. Sheetmetal Model Fundamentals
ii. Understanding Developed Length
iii. Creating a New Sheetmetal Part in Assembly Mode
iv. Creating a New Sheetmetal Model in Part Mode
v. Converting Solid Models to Sheetmetal
Knowledge Check Questions

Module 3. Creating Primary Sheetmetal Wall Features
i. Understanding Sheetmetal Wall Features
ii. Creating Planar Walls
iii. Extruded Sheetmetal Wall Features
iv. Revolved Sheetmetal Wall Features
v. Blend Sheetmetal Wall Features
vi. Creating Offset Walls
vii. Sheetmetal Wall Sketching Tools
viii. Advanced Primary Walls
Knowledge Check Questions

Module 4. Creating Secondary Sheetmetal Wall Features
i. Understanding Secondary Walls
ii. Creating Secondary Flat Walls
iii. Using Flange Walls
iv. Using Extruded Walls
v. Wall Dashboard Options
vi. Using Partial and Overextended Walls
vii. Understanding Relief
viii. Creating Twist Wall Features
ix. Extending and Trimming Walls
x. Using the Merge Feature
Knowledge Check Questions

Module 5. Bending and Unbending Sheetmetal Models
i. Creating Bend Features
ii. Adding Transition to Bends
iii. Creating Planar Bends
iv. Creating Unbend Features
v. Creating Bend Back Features
vi. Previewing and Creating Flat Patterns
vii. Creating Flat States
viii. Creating Split Area Features
Knowledge Check Questions

Module 6. Modifying Sheetmetal Models
i. Sheetmetal Cuts
ii. Notches and Punches
iii. Creating Corner Relief
iv. Die Form Features
v. Punch Form Features
vi. Utilizing Punch Model Annotations
vii. Creating Sketched Forms
viii. Flattening Forms and Unstamping Edges
ix. Creating Rip Features
x. Creating Edge Bends
xi. Joining Walls
xii. Patterning Walls
xiii. Mirroring Walls
Knowledge Check Questions

Module 7. Sheetmetal Setup and Tools
i. Bend Line Adjustments
ii. Using Bend Tables for Bend Allowances
iii. Fixed Geometry
iv. Info Tools and Reports
v. Design Rules
vi. Defaults and Parameters
vii. Using Conversion Features
Knowledge Check Questions

Module 8. Detailing Sheetmetal Designs
i. Adding the Flat and Formed States
ii. Auto Ordinate Dimensions
iii. Bend Line Notes
iv. Bend Order Tables
Knowledge Check Questions

Module 9. Design Project
i. Designing a Stapler

No comments yet.

Leave a Reply