Update to Creo Parametric 2.0 from Creo Elements/Pro 5.0

Loading Map....

Date(s) - 13/01/2017
9:00 am - 5:00 pm

PD Solutions Singapore Office


Update to Creo Parametric 2.0 from Creo Elements/Pro 5.0


Course Code: TRN-3900
Course Length: 1 Day

In this course, you will learn how to utilize the core functionality enhancements in Creo Parametric 2.0. First, you will become familiar with using and customizing the new ribbon interface in Creo Parametric. The new measure and sectioning interfaces will also be examined.

Next, you will become familiar with the Sketcher workflow and reference enhancements. Part modeling enhancements to features such as Extrude, Corner Chamfer, Sweeps, Blends, and Datum Curves will then be examined. You will also learn about new and enhanced Assembly capabilities, such as selecting multiple components, the new relationship constraints, and enhancements for dragging components.

Then, you will examine the new Table and Balloon functionality for 2-D drawings, and review various detailing enhancements. Finally, in Sheetmetal mode you will learn to use the many updated Wall, Bend, and Relief tools, as well as the consolidated Flat Pattern tool and configuring Sheetmetal properties.

At the end of each module, you will complete a skills assessment. The questions are used to help reinforce your understanding of the module topics and form the basis for review of any topics, if necessary.

Course Objectives

  • Utilize the Interface enhancements in Creo Parametric
  • Utilize the Sketcher enhancements in Creo Parametric
  • Utilize the Modeling enhancements in Creo Parametric
  • Utilize the Assembly enhancements in Creo Parametric
  • Utilize the Drawing enhancements in Creo Parametric
  • Utilize the Sheetmetal enhancements in Creo Parametric


Introduction to Pro/ENGINEER Wildfire 5.0, or equivalent experience with Pro/ENGINEER Wildfire 5.0 or Creo Elements/Pro 5.0


This course is intended for mechanical designers, design engineers, and related roles


Day 1
Module 1 Interface Enhancements
Module 2 Sketcher Enhancements
Module 3 Part Modeling Enhancements
Module 4 Assembly Enhancements
Module 5 Drawing Enhancements
Module 6 Sheetmetal Enhancements
Module 7 Appendix

Course Content

Module 1. Interface Enhancements
i. Understanding the Main Interface
ii. Creo Graphics Enhancements
iii. Understanding the Ribbon Interface
iv. Customizing the Ribbon Interface
v. Configuring Creo Options
vi. Selection Enhancements
vii. Locate in Model Tree Enhancement
viii. Using the Measure Tools
ix. Using the Measure Summary Tool
x. Creating Planar Part Cross-Sections
xi. Creating Assembly Cross-Sections
xii. Anti-Alias Edge Display Enhancement
Knowledge Check Questions

Module 2. Sketcher Enhancements
i. Sketcher Interface Enhancements
ii. Sketcher Workflow Enhancements
iii. Sketching Rectangles and Parallelograms
Knowledge Check Questions

Module 3. Part Modeling Enhancements
i. Feature Preview Enhancements
ii. Understanding Regeneration and Auto Regeneration
iii. Editing Features
iv. Automatically Adding and Removing Material
v. Adding Taper to Extrude Features
vi. Creating Corner Chamfers
vii. Variable Section and Simple Sweep Consolidation
viii. Creating Sweeps with Open Trajectories
ix. Creating Sweeps with Closed Trajectories
x. Analyzing Sweep Feature Attributes
xi. Helical Sweep Enhancements
xii. Creating Helical Sweeps for Springs
xiii. Analyzing Helical Sweep Profile and Pitch Variations
xiv. Utilizing Variable Sections in Helical Sweeps
xv. Creating Blends by Selecting Parallel Sections
xvi. Creating Blends by Selecting Non-Parallel Sections
xvii. Creating Blends by Sketching Sections
xviii. Analyzing Blend Section Tools
xix. Analyzing Blend Options
xx. Analyzing Blend Tangency
xxi. Creating Rotational Blends by Selecting Sections
xxii. Creating Rotational Blends by Sketching Sections
xxiii. Analyzing Rotational Blend Options
xxiv. Analyzing Rotational Blend Tangency
xxv. Creating Geometry Patterns
xxvi. Creating a Curve From Equation
xxvii. Creating a Curve from a Cross-Section
xxviii. Creating Curves Through a Point or Vertex
xxix. Creating a Curve Through a Point Array
xxx. Creating Cosmetic Sketches
xxxi. Creating Cosmetic Threads
Knowledge Check Questions

Module 4. Assembly Enhancements
i. Reference Dialog Enhancements
ii. Assembly Unit and Mass Properties Enhancements
iii. Component Rename Enhancements
iv. Assembly Appearance Enhancements
v. Assembly Model Tree Enhancements
vi. Selecting Multiple Components
vii. Orienting Components
viii. Creating Coincident Constraints using Geometry
ix. Creating Coincident Constraints using Datum Features
x. Creating Distance Constraints
xi. Creating Parallel, Normal, and Angle Constraints
xii. Assembling using Automatic
xiii. Retrieving Assembly Subsets
xiv. Lightweight Graphics Representations
xv. Restructuring and Reordering Assembly Components
xvi. Configuring Constraint Sets with Parameters
xvii. Reviewing Assembly Changes
Knowledge Check Questions

Module 5. Drawing Enhancements
i. Detail Options Enhancements
ii. Detailing Ribbon and Selection Enhancements
iii. Detailing Graphics Enhancements
iv. Prefix and Suffix Enhancements
v. Feature-Specific Text Enhancements
vi. Detailing Arrow Enhancements
vii. Detail and Section View Enhancements
viii. Dimension Text Orientation Enhancements
ix. View Scale Enhancements
x. BOM Enhancements
xi. Inserting Tables
xii. Editing Table Properties
xiii. Creating Tables from File
xiv. Creating BOM Balloons
xv. Dimension and Annotation Enhancements
xvi. Creating Combination States and Showing Annotations
xvii. Creating Annotation Planes and Annotation Features
xviii. Managing Annotation Display
Knowledge Check Questions

Module 6. Sheetmetal Enhancements
i. Sheetmetal Properties Enhancements
ii. Miscellaneous Sheetmetal Enhancements
iii. Extending and Trimming Walls
iv. Creating Offset Walls
v. Creating Bend Features
vi. Adding Transition to Bends
vii. Creating Planar Bends
viii. Creating Edge Bends
ix. Creating Unbend Features
x. Creating Bend Back Features
xi. Joining Walls
xii. Creating Sketched Forms
xiii. Flattening Forms and Unstamping Edges
xiv. Creating Split Area Features
xv. Creating Corner Relief
xvi. Creating Rip Features
xvii. Converting Solid Models to Sheetmetal
xviii. Using Conversion Features
xix. Previewing and Creating Flat Patterns
xx. Creating Flat States
Knowledge Check Questions

Module 7. Appendix
Knowledge Check Questions

No comments yet.

Leave a Reply