Update to Creo Parametric 2.0 from Pro/ENGINEER Wildfire 4.0

Loading Map....

Date/Time
Date(s) - 20/06/2016 - 21/06/2016
9:00 am - 5:30 pm

Location
PD Solutions Penang, Malaysia

Category(ies)



Update to Creo Parametric 2.0 from Pro/ENGINEER Wildfire 4.0


Overview

Course Code: TRN-3901
Course Length: 2 Days

In this course, you will learn how to utilize the core functionality enhancements in Creo Parametric 2.0. First, you will become familiar with using and customizing the new ribbon interface in Creo Parametric. The new measure and sectioning interfaces will also be examined. Next, you will study the Sketcher workflow and reference enhancements, as well as Sketcher constraint, geometry, and diagnostics enhancements. Part modeling enhancements to features such as Extrude, Trajectory Rib, Point Pattern, Corner Chamfer, Sweeps, Blends, UDFs, and Datum Curves will then be examined. You will also learn about new and enhanced Assembly capabilities such as selecting multiple components, the new relationship constraints, enhancements for dragging components, explode enhancements, simplified rep enhancements, and dynamic gear enhancements. Then you will learn how to identify and resolve part and assembly failures on the fly, without entering Resolve mode.

Next, you will examine the new Drawing tree and drawing sheets tabs, as well as showing annotations. Also in Drawing mode, you will learn the new Table and Balloon functionality for 2-D drawings, and review various detailing enhancements. Finally, in Sheetmetal mode you will learn to use the updated Wall, Bend, and Relief tools as well as the consolidated Flat Pattern tool and configuring Sheetmetal properties., and At the end of each module, you will complete a set of review questions to reinforce critical topics from that module.

At the end of the course, you will complete a course assessment in Pro/FICIENCY intended to evaluate your understanding of the course as a whole.


Course Objectives

  • Utilize the Interface enhancements in Creo Parametric 2.0
  • Utilize the Sketcher enhancements in Creo Parametric 2.0
  • Utilize the Modeling enhancements in Creo Parametric 2.0
  • Utilize the Assembly enhancements in Creo Parametric 2.0
  • Utilize the Drawing enhancements in Creo Parametric 2.0
  • Utilize the Sheetmetal enhancements in Creo Parametric 2.0

Prerequisites

Introduction to Pro/ENGINEER Wildfire 4.0, or equivalent experience with Pro/ENGINEER Wildfire 4.0 or Creo Elements/Pro 4.0


Audience

  • This course is intended for design engineers, mechanical designers, and industrial designers
  • People in related roles can also benefit from taking this course

Agenda

Day 1
Module 1 Interface Enhancements
Module 2 Sketcher Enhancements
Module 3 Part Modeling Enhancements
Module 4 Assembly Enhancements

Day 2
Module 5 Resolving Failures
Module 6 Drawing Enhancements
Module 7 Sheetmetal Enhancements
Module 8 Appendix


Course Content

Module 1. Interface Enhancements
i. Understanding the Main Interface
ii. Creo Graphics Enhancements
iii. Understanding the Ribbon Interface
iv. Customizing the Ribbon Interface
v. Configuring Creo Options
vi. Selection Enhancements
vii. Insert Position Enhancements
viii. Creating Layer States
ix. Managing and Editing Appearances
x. Locate in Model Tree Enhancement
xi. Using the Measure Tools
xii. Using the Measure Summary Tool
xiii. Creating Planar Part Cross-Sections
xiv. Creating Assembly Cross-Sections
xv. Anti-Alias Edge Display Enhancement
Knowledge Check Questions

Module 2. Sketcher Enhancements
i. Sketcher Interface Enhancements
ii. Sketcher Workflow Enhancements
iii. Utilizing Constraints
iv. Sketching with On-the-Fly Constraints
v. Sketcher Dimension Enhancements
vi. Locking Sketcher Entities
vii. Sketching Rectangles and Parallelograms
viii. Sketching Chamfers
ix. Sketching Ellipses
x. Thickening Edges
xi. Sketching Geometry Datums
xii. Sketcher Diagnostic Tools
Knowledge Check Questions

Module 3. Part Modeling Enhancements
i. Lightweight Hole Display
ii. Intersect at Surface Round Transition
iii. Creating Curvature Continuous Rounds
iv. Feature Preview Enhancements
v. Understanding Regeneration and Auto Regeneration
vi. Editing Features
vii. Automatically Adding and Removing Materialviii. Adding Taper to Extrude Features
ix. Creating Corner Chamfers
x. Creating Trajectory Ribs
xi. Variable Section and Simple Sweep Consolidation
xii. Creating Sweeps with Open Trajectories
xiii. Creating Sweeps with Closed Trajectories
xiv. Analyzing Sweep Feature Attributes
xv. Helical Sweep Enhancements
xvi. Creating Helical Sweeps for Springs
xvii. Analyzing Helical Sweep Profile and Pitch Variations
xviii. Utilizing Variable Sections in Helical Sweeps
xix. Creating Blends by Selecting Parallel Sections
xx. Creating Blends by Selecting Non-Parallel Sections
xxi. Creating Blends by Sketching Sections
xxii. Analyzing Blend Section Tools
xxiii. Analyzing Blend Options
xxiv. Analyzing Blend Tangency
xxv. Creating Rotational Blends by Selecting Sections
xxvi. Creating Rotational Blends by Sketching Sections
xxvii. Analyzing Rotational Blend Options
xxviii. Analyzing Rotational Blend Tangency
xxix. Creating Geometry Patterns
xxx. Creating Point Patterns
xxxi. Direction Patterning with Multiple Direction Types
xxxii. Creating Axes from Coordinate Systems
xxxiii. Creating On-Surface Coordinate Systems
xxxiv. UDF Enhancements
xxxv. Creating UDFs Using On-Surface Coordinate Systems
xxxvi. Creating a Curve From Equation
xxxvii. Creating a Curve from a Cross-Section
xxxviii. Creating Curves Through a Point or Vertex
xxxix. Creating a Curve Through a Point Array
xl. Creating Cosmetic Sketches
xli. Creating Cosmetic Threads
xlii. Using the Draft Analysis Option
Knowledge Check Questions

Module 4. Assembly Enhancements
i. Reference Dialog Enhancements
ii. Assembly Unit and Mass Properties Enhancements
iii. Component Rename Enhancements
iv. Generic Instance Enhancementsv. Assembly Feature Enhancements
vi. Assembly Appearance Enhancements
vii. Assembly Model Tree Enhancements
viii. Selecting Multiple Components
ix. Orienting Components
x. Creating Coincident Constraints using Geometry
xi. Creating Coincident Constraints using Datum Features
xii. Creating Distance Constraints
xiii. Creating Parallel, Normal, and Angle Constraints
xiv. Assembling using Automatic
xv. Utilizing the Accessory Window
xvi. Component Operation Enhancements
xvii. Repeating Component Placement
xviii. Creating and Managing Explode States
xix. Creating Explode Lines
xx. Animating Explode States
xxi. Retrieving Assembly Subsets
xxii. Lightweight Graphics Representations
xxiii. Restructuring and Reordering Assembly Components
xxiv. Configuring Constraint Sets with Parameters
xxv. Reviewing Assembly Changes
xxvi. Simplified Representation Enhancements
xxvii. Defining Simplified Reps Using the Component Chooser
xxviii. Envelope Enhancements
xxix. Creating and Using an All Solid Surfaces Shrinkwrap Envelope
xxx. Creating a Default Envelope Simplified Rep
xxxi. Mechanism Enhancements
xxxii. Creating Generic Gear Connections
xxxiii. Creating Dynamic Gear Connections
xxxiv. Creating Belt Connections
Knowledge Check Questions

Module 5. Resolving Failures
i. Understanding and Identifying Failures
ii. Analyzing Geometry Failures
iii. Analyzing Open Section Failures
iv. Analyzing Missing Part Reference Failures
v. Analyzing Missing Component Failures
vi. Analyzing Missing Component Reference Failures
vii. Analyzing Invalid Assembly Constraint Failures
viii. Understanding Resolve Mode Tools
ix. Recovering Modelsx. Using Creo Parametric Help
Knowledge Check Questions

Module 6. Drawing Enhancements
i. Understanding the Drawing Ribbon User Interface
ii. Exploring Drawing Ribbon Commands
iii. Detailing Ribbon and Selection Enhancements
iv. Utilizing the Drawing Tree
v. Managing Drawing Sheets
vi. Showing, Erasing, and Deleting Annotations
vii. Dimension Enhancements
viii. Detailing Enhancements
ix. Printing Enhancements
x. Detail Options Enhancements
xi. Detailing Graphics Enhancements
xii. Prefix and Suffix Enhancements
xiii. Feature-Specific Text Enhancements
xiv. Detailing Arrow Enhancements
xv. Detail and Section View Enhancements
xvi. Dimension Text Orientation Enhancements
xvii. View Scale Enhancements
xviii. BOM Enhancements
xix. Inserting Tables
xx. Editing Table Properties
xxi. Creating Tables from File
xxii. Creating BOM Balloons
xxiii. Dimension and Annotation Enhancements
xxiv. Creating Combination States and Showing Annotations
xxv. Creating Annotation Planes and Annotation Features
xxvi. Managing Annotation Display
Knowledge Check Questions

Module 7. Sheetmetal Enhancements
i. Sheetmetal Properties Enhancements
ii. Miscellaneous Sheetmetal Enhancements
iii. Extending and Trimming Walls
iv. Creating Offset Walls
v. Creating Bend Features
vi. Adding Transition to Bends
vii. Creating Planar Bends
viii. Creating Edge Bends
ix. Creating Unbend Featuresx. Creating Bend Back Features
xi. Joining Walls
xii. Creating Sketched Forms
xiii. Flattening Forms and Unstamping Edges
xiv. Creating Split Area Features
xv. Creating Corner Relief
xvi. Creating Rip Features
xvii. Converting Solid Models to Sheetmetal
xviii. Using Conversion Features
xix. Previewing and Creating Flat Patterns
xx. Creating Flat States
xxi. Punch Form Enhancements
xxii. Utilizing Punch Model Annotations
xxiii. Flatten Form Enhancements
xxiv. Patterning Walls
xxv. Mirroring Walls
xxvi. Csys Follow Surface Option
Knowledge Check Questions

Module 8. Appendix
Knowledge Check Questions


No comments yet.

Leave a Reply