Certified CAD/CAM Training Partner for PTC in Singapore
Our team of Certified Trainers conduct regular classes as well as on-site or customised training upon request. We use Certified material from PTC for our Creo training, and all our trainers also go through a Certification process to ensure good quality training.
In addition to our Scheduled Training classes at our facility, we can help you to organise Web-Based Training / set up a Proficiency Evaluation /customise software / conduct classes on-site.
Scheduled below are Creo core classes. PD Solutions, a 3D CAD/CAM Reseller in Singapore and Malaysia (Penang & Kuala Lumpur), also conducts training for specialised modules like Intralink, Mold Design, Mechanica, Top Down Design, Large Assemblies, ISDX, MDX, Behavioral Modelling etc.
Training Schedule |
|---|
| Start | End | Days | Code | Course Title / Description |
|---|---|---|---|---|
|
20 May 2013 |
22 May 2013 | 3 | TRN 3904 |
 Advanced Assembly Design using Creo Parametric 2.0
|
|
23 May 2013 |
24 May 2013 | 2 | TRN 3907 |
 Sheetmetal Design using Creo Parametric 2.0
|
|
30 May 2013 |
1 | TRN 3915 |
 Flexible Modeling using Creo Parametric 2.0
|
|
|
31 May 2013 |
1 | TRN 3900 |
 Update to Creo Parametric 2.0 from Creo Elements/Pro 5.0
|
|
|
3 Jun 2013 |
4 Jun 2013 | 2 | TRN 3907 |
Sheetmetal Design using Creo Parametric 2.0
|
|
5 Jun 2013 |
7 Jun 2013 | 3 | TRN 3904 |
Advanced Assembly Design using Creo Parametric 2.0
|
|
10 Jun 2013 |
14 Jun 2013 | 5 | TRN 3902 |
 Introduction to Creo Parametric 2.0
|
|
10 Jun 2013 |
14 Jun 2013 | 5 | TRN 3911 |
 Introduction to Creo Simulate 2.0
|
|
17 Jun 2013 |
19 Jun 2013 | 3 | TRN 3905 |
 Detailing using Creo Parametric 2.0
|
|
20 Jun 2013 |
21 Jun 2013 | 2 | TRN 2136 T |
 Introduction to Windchill PDMLink 9.0/9.1
|
|
20 Jun 2013 |
21 Jun 2013 | 2 | TRN 3901 |
 Update to Creo Parametric 2.0 from Pro/ENGINEER Wildfire 4.0
|
|
24 Jun 2013 |
26 Jun 2013 | 3 | TRN 3906 |
 Surfacing using Creo Parametric 2.0
|
*Last updated 31 December 2012
Training Contact List |
|---|
| Singapore Training Venue:PD Solutions Pte Ltd 305 Alexandra Road #05-01/02 Vantage Automotive Centre Singapore 159942 Registration Form (Singapore) |
 Tel : (65) 6732 9818 / Fax : (65) 6736 2028Email : Irene@pdsol.com (Ms Irene)Training Hours : 9am – 5pm (Mondays to Fridays only) |
|---|
Terms and Conditions:
- Courses are conducted in Pro/ENGINEER Wildfire 5.0, Creo Parametric 1.0 and , Creo Parametric 2.0
- Prerequisite for all secondary courses: Pro/ENGINEER Wildfire 5.0 or Introduction to Creo Parametric 1.0 or Introduction to Creo Parametric 2.0
- Training must be fully consumed within 6 months from invoice date.
- For cancellations or “No Shows” made less than 5 working days prior to the start of the course, 50% of the full course fee will be charged, or if the course was part of a package, the training will be forfeited.
We also conduct hands-on sessions, update classes, and customised training to accommodate your special needs.
For customised training requirements / classes that are not listed above, please contact:
Singapore: Ms Irene at 67329818 ext 817 or Irene@pdsol.com
