TRAINING


Milling using Creo Parametric 3.0

Our team of Certified Trainers conduct regular classes as well as on-site or customised training upon request. We use Certified material from PTC for our Creo training, and all our trainers also go through a Certification process to ensure good quality training. In addition to our Scheduled Training classes at our facility, we can help you to organise Web-Based Training / set up a Proficiency Evaluation /customise software / conduct classes on-site. Scheduled below are Creo core classes.

  • Course Code: TRN-4508-T
  • Course Length: 5 Days
  • Date: Nov 06 2017 - Nov 10 2017
  • Time: 9.30am-5.30pm
  • Address: Suite B-09-09, Plaza Mont’Kiara, 2 Jalan Kiara, Mont’Kiara 50480, Kuala Lumpur, Malaysia

Overview

In this course, you will learn how to machine products using Creo Parametric manufacturing tools. This course covers creating tool paths for three axis milling machines. During the course, you will learn how to complete each phase of the manufacturing process. You will start by creating manufacturing models and configuring the manufacturing environment. This will include configuring tools, fixtures, and machining operations. You will then learn how to create milling sequences, holemaking sequences, and post-process cutter location (CL) data to create machine code. After completing the course, you will be able to create numerical control (NC) programs for milling machines and post-process cutter location (CL) data to create machine specific code.

At the end of each module, you will complete a set of review questions to reinforce critical topics from that module. At the end of the course, you will complete a course assessment in Pro/FICIENCY intended to evaluate your understanding of the course as a whole.

Course Objectives

  • Understanding the manufacturing process
  • Create and configure manufacturing models
  • Configure the manufacturing environment
  • Create and modify milling sequences
  • Create and modify holemaking sequences
  • Use the process manager to create NC sequences
  • Post-process cutter location (CL) data

Prerequisites

  • Introduction to Creo Parametric – Fundamentals (Web Based Training) or equivalent experience

Audience

  • This course is intended for manufacturing engineers and NC machinists

Agenda

Day 1

  • Module 1: Introduction to Manufacturing
  • Module 2: Creating Manufacturing Models
  • Module 3: Configuring Operations
  • Module 4: Using Reference Models
  • Module 5: Using Workpiece Models
  • Module 6: Creating and Using NC Model Assemblies
  • Module 7: Creating and Configuring a Work Center

 

Day 2

  • Module 8: Creating and Configuring Tools
  • Module 9: Using Template Manufacturing Models
  • Module 10: Using Manufacturing Parameters
  • Module 11: Creating Face Milling Sequences

 

Day 3

  • Module 12: Creating Volume Milling Sequences
  • Module 13: Creating Profile Milling Sequences
  • Module 14: Creating Straight Cut Surface Milling Sequences
  • Module 15: Creating From Surface Isolines Surface Milling Sequences

 

Day 4

  • Module 16: Creating Cut Line Surface Milling Sequences
  • Module 17: Advanced Surface Milling Options
  • Module 18: Creating Roughing and Re-roughing Sequences
  • Module 19: Creating Finishing Sequences

 

Day 5

  • Module 20: Creating Trajectory Milling Sequences
  • Module 21: Creating Holemaking Sequences
  • Module 22: Creating Engraving Sequences
  • Module 23: Using the Process Manager
  • Module 24: Creating and Post-Processing CL Data Files