Sheetmetal using Creo Parametric 4.0

Course Title: Sheetmetal using Creo Parametric 4.0

Our team of Certified Trainers conduct regular classes as well as on-site or customised training upon request. We use Certified material from PTC for our Creo training, and all our trainers also go through a Certification process to ensure good quality training. In addition to our Scheduled Training classes at our facility, we can help you to organise Web-Based Training / set up a Proficiency Evaluation /customise software / conduct classes on-site. Scheduled below are Creo core classes.

Course Code: TRN-5107-T
Course Length: TRN-5107-T
Date: 11 June, 2020 - 12 June, 2020
Time: 9.30am-5.30pm
Address: 1-04-04 eGate, Lebuh Tunku Kudin 2, 11700 Gelugor, Penang Malaysia


In this course, you will learn how to create sheetmetal parts in Creo Parametric. The course builds upon the basic lessons you learned in Introduction to Creo Parametric 4.0 and serves as the second stage of learning. In this course, you will learn how to design sheetmetal parts and assemblies, including sheetmetal production drawings. All the functions needed to create sheetmetal parts, drawings, and assemblies are covered. Upon completion of this course, you will be able to create sheetmetal design models, create the flat state of the model, and document both in production drawings. At the end of each module, you will complete a set of review questions to reinforce critical topics from that module. At the end of the course, you will complete a course assessment in PTC University Proficiency intended to evaluate your understanding of the course as a whole. This course has been developed using Creo Parametric 4.0.

Course Objectives

  • Create, convert, and display the sheetmetal model
  • Use methods of developed length calculation
  • Use primary and secondary wall features, as well as partial walls
  • Use bend relief
  • Use unbend and bend back features
  • Apply sheetmetal bend features
  • Use flat patterns
  • Create sheetmetal cuts
  • Create forms
  • Use notch and punch features
  • Utilize the sheetmetal environment setup, sheetmetal design information tools, and sheetmetal design rules
  • Detail sheetmetal designs


  • Introduction to Creo Parametric 4.0


  • This course is intended for design engineers, mechanical designers, and industrial designers. People in related roles can also benefit from taking this course.


Day 1

  • Module 1: Introduction to the Creo Parametric Sheetmetal Design Process
  • Module 2: Sheetmetal Model Fundamentals
  • Module 3: Creating Primary Sheetmetal Wall Features
  • Module 4: Creating Secondary Sheetmetal Wall Features

Day 2

  • Module 5: Bending and Unbending Sheetmetal Models
  • Module 6: Sheetmetal Form Features
  • Module 7: Modifying Sheetmetal Models
  • Module 8: Sheetmetal Setup and Tools
  • Module 9: Detailing Sheetmetal Designs
  • Module 10: Design Project