Mold Design Using Creo Parametric 3.0

Course Title: Mold Design Using Creo Parametric 3.0

Our team of Certified Trainers conduct regular classes as well as on-site or customised training upon request. We use Certified material from PTC for our Creo training, and all our trainers also go through a Certification process to ensure good quality training. In addition to our Scheduled Training classes at our facility, we can help you to organise Web-Based Training / set up a Proficiency Evaluation /customise software / conduct classes on-site. Scheduled below are Creo core classes.

Course Code: TRN-4517
Course Length: TRN-4517
Date: 21 June, 2018 - 22 June, 2018
Time: 9.30am-5.00pm
Address: 305 Alexandra Road, #05-01/02 Vantage Automotive Centre, Singapore 159942

Overview

The Mold application provides the tools necessary to create a mold model from start to finish using the mold design process within Creo Parametric 3.0. In this course, you will learn how to create, modify, and analyze mold components and assemblies. Any changes made to the design model automatically propagate to the mold components and assemblies. You will also learn how to create final extract components that reflect the geometry of the design model, along with shrinkage considerations, adequate drafting, mold features, and cooling systems. After completing this course, you will have a better understanding of the mold design process and how to create molded products using the mold design process. At the end of each module, you will complete a set of review questions to reinforce critical topics from that module. At the end of the course, you will complete a course assessment in Pro/FICIENCY intended to evaluate your understanding of the course as a whole.

Course Objectives

  • Learn the basic mold process
  • Prepare design models for the mold process
  • Analyze design models to ensure their readiness for molding
  • Create mold models
  • Apply shrinkage to the reference model
  • Create and assemble workpieces into the mold model
  • Create mold volumes
  • Create parting lines and parting surfaces
  • Split mold volumes
  • Extract mold components
  • Create mold features
  • Fill and open a mold

Prerequisites

  • Introduction to Creo Parametric 3.0
  • Basic understanding of mold design terminology and processes
  • Knowledge of Creo Parametric surfacing techniques is a plus

Audience

  • This course is intended for designers, machinists, and manufacturing engineers. People in related roles will also benefit from taking this course.

Agenda

Day 1

  • Module 1: Introduction to the Creo Parametric Basic Mold Process
  • Module 2: Design Model Preparation
  • Module 3: Design Model Analysis
  • Module 4: Mold Models
  • Module 5: Shrinkage
  • Module 6: Workpieces
  • Module 7: Mold Volume Creation

 

Day 2

  • Module 8: Parting Lines
  • Module 9: Skirt Surfaces
  • Module 10: Parting Surface Creation
  • Module 11: Splitting Mold Volumes
  • Module 12: Mold Component Extraction
  • Module 13: Mold Features Creation
  • Module 14: Filling and Opening the Mold