Milling using Creo Parametric 4.0

Our team of Certified Trainers conduct regular classes as well as on-site or customised training upon request. We use Certified material from PTC for our Creo training, and all our trainers also go through a Certification process to ensure good quality training. In addition to our Scheduled Training classes at our facility, we can help you to organise Web-Based Training / set up a Proficiency Evaluation /customise software / conduct classes on-site. Scheduled below are Creo core classes.

  • Course Code: TRN-5108-T
  • Course Length: 5 Days
  • Date: Apr 23 2018 - Apr 27 2018
  • Time: 9.30am-5.30pm
  • Address: 1-04-04, e-Gate, Lebuh Tunku Kudin 2, 11700 Penang, Malaysia


In this course, you will learn how to machine products using Creo Parametric manufacturing tools. This course covers creating tool paths for three axis milling machines. During the course, you will learn how to complete each phase of the manufacturing process. You will start by creating manufacturing models and configuring the manufacturing environment. This will include configuring tools, fixtures, and machine operations. You will then learn how to create milling sequences, holemaking sequences, and post-process cutter location (CL) data to create machine code. After completing the course, you will be able to create numerical control (NC) programs for milling machines and post-process cutter location (CL) data to create machine specific code.

At the end of each module, you will complete a set of review questions to reinforce critical topics from that module. At the end of the course, you will complete a course assessment in PTC University Proficiency intended to evaluate your understanding of the course as a whole.

This course has been developed using Creo Parametric 4.0 B000.

Course Objectives

  • Understand the manufacturing process
  • Create and configure manufacturing models
  • Configure the manufacturing environment
  • Create and modify milling sequences
  • Create and modify holemaking sequences
  • Use the process manager to create NC sequences
  • Post-process cutter location (CL) data


  • Introduction to Creo Parametric – Fundamentals (Web Based Training) or equivalent experience


  • This course is intended for manufacturing engineers and NC machinists


Day 1

  • Module 1: Introduction to Manufacturing
  • Module 2: Creating Manufacturing Models
  • Module 3: Configuring Operations
  • Module 4: Using Reference Models
  • Module 5: Using Workpiece Models
  • Module 6: Creating and Using NC Model Assemblies
  • Module 7: Creating and Configuring a Work Center


Day 2

  • Module 8: Creating and Configuring Tools
  • Module 9: Using Template Manufacturing Models
  • Module 10: Using Manufacturing Parameters
  • Module 11: Creating Face Milling Sequences


Day 3

  • Module 12: Creating Volume Milling Sequences
  • Module 13: Creating Profile Milling Sequences
  • Module 14: Creating Straight Cut Surface Milling Sequences
  • Module 15: Creating From Surface Isolines Surface Milling Sequences


Day 4

  • Module 16: Creating Cut Line Surface Milling Sequences
  • Module 17: Advanced Surface Milling Options
  • Module 18: Creating Roughing and Re-roughing Sequences
  • Module 19: Creating Finishing Sequences


Day 5

  • Module 20: Creating Trajectory Milling Sequences
  • Module 21: Creating Holemaking Sequences
  • Module 22: Creating Engraving Sequences
  • Module 23: Using the Process Manager
  • Module 24: Creating and Post-Processing CL Data Files